FIXTURLASER NXA Pro
FIXTURLASER NXA Pro A revolution in shaft alignment as well as a revolution in usability with the NXA Pro – a digital laser based shaft alignment system! The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.
It is a shaft alignment revolution
FIXTURLASER NXA Pro
A revolution in shaft alignment as well as a revolution in usability with the NXA Pro – a digital laser based shaft alignment system!
The NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView™ and the VertiZontal Moves™, and probably the best power management system in the market place.
FIXTURLASER NXA Pro
Alignment Intelligence
The NXA Pro system represents over 30 years of laser-based shaft alignment innovation. Through Alignment Intelligence, maintenance professionals can do their jobs more efficiently and achieve better results.
Adaptive User Interface for Smart Sensors
You will be guided through the measurement and alignment process of your machines using the adaptive user interface of the NXA Pro.
OmniView
The graphical user interface is shown off on a 6,5” transreflective display screen with icons and symbols to guide you, in other words, no text is involved.
The adaptive user interface will guide you throughout the measurement and alignment process.
We have fitted the NXA Pro with gyros and can, therefore, adapt the screen view from the same side that the user is positioned – our OmniView™ function, i.e. the system knows where it is in relation to the machine.
VertiZontal Moves
The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves™ – where you only have to measure once before making the required vertical and horizontal adjustments. Quite a time conserver in a time-strained maintenance world!
Power management system
The NXA Pro has a power management system that will make your life so much easier! The display unit has a 10 hour continuous battery operating time, and should the need arise during an alignment job; the display unit can be express charged to an 80% capacity in one hour. The sensor units will last for 24 hours minimum thanks to the long-life batteries.
Time-saving technology
The NXA Pro’s sensor units have graduated to the 2nd generation sensor. This sensor version improves the tolerance for detrimental external factors, such as vibrations and ambient light, and delivers the most accurate and precise measurement values compared to any other system. Measurement values are automatically registered throughout the entire measurement process. We have integrated line laser with the sensor and this combination virtually eliminates rough alignment, a huge time saver.
Very compact, only 33,5 mm in width, the sensor units will fit in the tightest spots. The sensor units contain long-life batteries, Bluetooth communication, and gyroscopes. The gyroscopes make it possible to measure according to the Tripoint Method in the vertical shaft alignment application, something that no other shaft alignment instrument is capable of!
NXA Pro – Package with Case
- Display unit
- 2 pcs of digital smart sensors
- 2 pcs of complete V-brackets
- 2 pcs of magnetic V-brackets
- 2 pcs of chains 8 mm 60 links
- Rod kit
- Extension fixture, 49 mm
- Magnetic base
- Tape measure 5 m
- 2 pcs of angled universal tools
- USB stick
- Charger for display unit and sensors
- NXA manual – English version
Techincal specification
| NXA Pro* | |
|---|---|
| Weight including all standard parts | 7,7 kg (17 lbs) |
| Storage temp | -20 to 70°C ( -4 to 158°F) |
| Long term storage temp | Room temp. 18 to 28°C (64 to 82°F) |
| Case | |
|---|---|
| Material | High Impact ABS Plastic |
| Weight (empty) | 2,5 kg (5,5 lbs) |
| Environmental protection | Dust-, Water- (5m), Air-tight with air pressure compensation valve |
| Drop test (empty) | 3m onto concrete floor |
| Storage Temp(empty) | -40 to 80 °C |
| Dimension | 415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in) |
| Display Unit | |
|---|---|
| Housing Material | Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber |
| Operating Temp | -10 to 50°C ( 14 to 122°F) |
| Battery Charging Temp, system off | 0 to 38°C ( 32 to 100°F) |
| Battery Charging Temp, system on | 0 to 32°C ( 32 to 90°F) |
| Storage Temp | -20 to 70°C ( -4 to 158°F) |
| Long term storage temp | Room temp. 18 to 28°C (64 to 82°F) |
| Relative humidity | 10 – 90% |
| Weight | 1,2 kg (2,6 lbs) with battery |
| Dimensions | 124mm x 158mm x 49mm (4,9 in x 6,2 in x x 1,9 in) |
| Environmental protection | IP 65 (Dust-tight and protected against water jets) |
| Processor | 1 GHz Dual-core main processor with ultra low power core for instant power management |
| RAM memory | 256 Mb |
| Flash storage memory | 8 Gb >100 000 measurements |
| Display | Colour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology |
| Display size | 6,5” (165mm) diagonal (133 x 100 mm) |
| Display resolution | Full VGA 640×480 pixels |
| Color depth | 262 000 colors |
| Interface | 6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare |
| Gyroscope | 6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration. |
| Peripherals – User accessible | 1 USB 2.0 Master port (IP 67) 1 Power/Charger connector 10-14V DC (IP 67) |
| Peripherals – Distributor accessible | 1 Ethernet 10/100BaseT RJ45 1 HDMI port (DVI compatible) 1 Service port |
| Wireless communication | Class I Bluetooth transmitter with multi-drop capability |
| Power supply | High performance, High-Temperature rechargeable Li-Ion battery or external power supply |
| Operating time | 10 hours continuous use (with 50% LCD backlight) |
| Battery Charging time (system off, room temperature) | 5 h |
| Xpress Battery Charging time (system off, room temperature) | 1 h charge – 5 hours operating time |
| LED indicators | Unit state and 2×5 battery state indicators with instant battery check |
| Digital Laser Sensors | |
|---|---|
| Housing Material: | Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber |
| Operating Temp: | -10 to 50°C (14 to 122°F) |
| Storage Temp: | -20 to 70°C ( -4 to 158°F) |
| Long term storage temp: | Room temp. 18 to 28°C (64 to 82°F) |
| Battery Charging Temp: | 0 to 40°C ( 32 to 104°F) |
| Relative humidity: | 10 – 90% |
| Weight: | 192 g (6,8 oz) with battery |
| Dimensions: | 92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in) |
| Environmental protection: | IP 65 (Dust-tight and protected against water jets) |
| Laser | 650 nm class II diode laser |
| Laser line fan angle | 6° |
| Laser line width (1/e2) | 1.6 mm |
| Laser line divergence (full angle) | 0.25 mrad |
| Laser power | < 1 mW |
| Measurement distance | Up to 10m |
| Detector | 2nd gen. digital sensor |
| Detector length | 30mm ( 1,2 in ) |
| Detector angular subtense | 30mrad/m (3mm/100mm per meter) |
| Detector resolution | 1 µm |
| Measurement accuracy | 0,3% ± 7 µm |
| Signal processing: | Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode |
| Ambient light protection | Optical filtering and digital ambient light signal elimination |
| Inclinometer: | Dual High-Performance MEMS inclinometers |
| Inclinometer resolution | 0,01° |
| Inclinometer accuracy | ±0,2° |
| Gyroscope | 6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration |
| Gyroscope accuracy | ±1° |
| Total measurement axis’s (M3 S3 unit) | 14 |
| Wireless communication: | Class I Bluetooth transmitter |
| Communication range | 10 m (33 ft) |
| Peripherals – User accessible | 1 USB Mini port (IP 67); Charging: 5V, 0,5A Communication: with separate USB/RS 485 adapter cable |
| Power supply | High-performance Li-Ion battery or external power. |
| Operating time: | 17 hours continuous use (measuring) |
| Battery Charging time (system off, room temperature) | 8 h |
| LED indicators | Unit state, laser transmission and 5 battery status indicators with instant battery check |
| Laser safety* |  |
| Shaft brackets | |
|---|---|
| Fixture: | V-fixture with non-twisting chain, width 20 mm (0,79 in) |
| Material: | Anodized aluminum |
| Shaft diameter: | Ø 25-175 mm (1”-6.9”) Ø 25-450 mm (1”-18”) (with extension chains) |
| Rods: | 4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in) Extendable to 250 mm (9,8 in) |
There are no reviews yet.