Call us 24/7+62-21-97755421
FREE DELIVERY on all orders
FLASH SALE: 60% FARO | USE CODE "FARO60"

New Olympus OmniScan X3 64 Phased Array Flaw Detector

$11.800

In stock
Buy it now
Brands:

Olympus OmniScan X3 64

Olympus OmniScan X3 64 detector’s powerful focusing capabilities supported by its larger element-aperture capacity enable you to fully exploit 64-element phased array probes and 128-element aperture TFM. Utilize its enhanced performance to meet the inspection challenges of thick and attenuative materials and expand your potential to develop new procedures for a wider range of applications.

Olympus OmniScan X3 64 Phased Array Flaw Detector with Innovative TFM
Confidence You Can See

Olympus OmniScan X3 64 flaw detector is a complete phased array toolbox. Powerful tools, including total focusing method (TFM) imaging and advanced visualization capabilities, backed by its high image quality enable you to complete your inspection with greater confidence.

Benefit from 64-Pulser Phased Array
Exploit the full potential of 64-element phased array probes using the OmniScan X3 64 flaw detector to achieve improved resolution at the focal point.

Slide Right: Acquired using a 32-channel OmniScan X3 unit with a 64-element probe (5L64-A32 model), this S-scan is a high-quality image but the resolution reflects the fact that only the middle 32 elements could be used for the focal law.

Slide Left: Using a full 64-element aperture (5L64-A32 probe), the OmniScan X3 64 flaw detector provides better PA resolution at the focal point, enabling you to more easily distinguish indications that are close together or in a cluster.

Access Full 128-Element Aperture TFM
Made possible by new generation electronics, TFM imaging offers better focusing capabilities for smaller indications and an improved signal-to-noise ratio (SNR). With its 128-element aperture capacity, the OmniScan X3 64 model provides enhanced image clarity.

Slide Right: This TFM image was acquired with 64 elements of a 128-element probe (3.5L128-I4 model) using an OmniScan X3 32-channel model.

Slide Left: Here, the OmniScan X3 64 flaw detector enabled us to use the full 128-element aperture of our 3.5 MHz, 128-element I4 probe. Note the improved resolution and reduced background noise.

Improved Phased Array

Olympus OmniScan X3 64

Up to 3x as fast as the OmniScan MX2 flaw detector (max pulse repetition frequency)
Single TOFD menu for an accelerated calibration workflow
800% high amplitude range reduces the need to rescan
Onboard Dual Linear Array and Dual Matrix Array probe support accelerates setup creation.

Ease Corrosion Monitoring Using Phased Array
Using phased array to inspect corrosion offers many benefits, including excellent coverage and resolution. However, becoming proficient in phased array techniques can be challenging. The OmniScan X3 flaw detector combines advanced functions such as gate synchronization with thoughtfully designed software and simplified menus, so you can obtain accurate data more easily. Configure your setup quickly thanks to its A-scan synchronization processing and manual time-corrected gain (TCG).

 • Data Specifications • Acoustic Specifications • TFM/FMC • Operating Environment

TypeMultigroup, multimode ultrasonic flaw detector
Size (W × H × D)335 mm x 221 mm x 151 mm (13.2 in. x 8.7 in. x 5.9 in.)
Weight5.7 kg (12.6 lb) (with 1 battery)
Hard Drive CapacityOmniScan X3 : Internal 64 GB SSD
OmniScan X3 64 : Internal 1TB SSD
extendable using an external USB drive
Storage DevicesSDHC and SDXC cards or most standard USB storage devices
Max Onboard File Size25 GB
GPSYes (unless specified otherwise for some regions)
Alarms3
Wireless ConnectionYes – wireless LAN dongle included in the package (model varies according to region)
PA Connectors1 connector
UT Connectors4 (2 channels P/R)
CertificationsISO 18563-1:2015
ISO-22232-1:2020
Display
TypeTFT LCD with resistive touch screen
Size269 mm (10.6 in.)
Resolution1280 × 768 pixels
Number of Colors16 million
Viewing AnglesHorizontal: −85° to 85°
Vertical: −85° to 85°
I/O Ports
USB 2.02 ports (one hidden behind the battery)
USB 3.01 port
Video OutputVideo out (HDMI)
Memory CardSDHC port
CommunicationEthernet
I/O Lines
Encoder2-axis encoder line (quadrature quadrature direction), 3rd encoder ready
Digital Input6 digital inputs, TTL
Digital Output5 digital outputs, TTL
Acquisition On/Off SwitchThrough the configuration of a digital input
Power Output Line5 V nominal, 1 A (short-circuit protected), and 12 V output at 1 A
External DC Supply
DC-IN Voltage15 VDC to 18 VDC (min. 50 W)
ConnectorCircular, 2.5 mm pin diameter, center-positive
Battery
TypeLithium-ion battery
Capacity87 Wh
Number of Batteries2
Life5 hours using 2 batteries (hot-swap capable)
PA/UT Configuration
Bit Depth16 bits
Maximum PRF20 kHz
Frequency
Effective Digitizing FrequencyUp to 100 MHz
Display
Refresh RateA-scan: 60 Hz; S-scan: 20 Hz to 30 Hz
Envelope (echo-dynamic mode)Yes: Volume-corrected S-scan (30 Hz)
A-Scan HeightUp to 800%
Synchronization
On Internal Clock1 Hz to 10 kHz
External PaceYes
On EncoderOn 2 axes: from 1 to 65,536 steps

Data Specifications

Processing
Maximum Number of A-Scan Data PointsUp to 16,384
Real-Time AveragingPA: 2, 4, 8, 16
UT: 2, 4, 8, 16, 32, 64
RectificationRF, full wave, half wave , half wave-
FilteringPA channel (OmniScan X3): 8 low-pass, 6 band-pass, and 4 high-pass filters
PA channel (OmniScan X3 64): 9 band-pass and 7 high-pass filters
UT channel: 8 low-pass, 6 band-pass, and 4 high- pass filters (3 additional filters when configured in TOFD)
Video FilteringSmoothing (adjusted to the probe frequency range)
Programmable TCG
Number of Points32: One TCG (time-corrected gain) curve per focal law
RangePA (standard): 40 dB per step of 0.1 dB
UT: 100 dB per step of 0.1 dB
Maximum SlopePA (standard): 40 dB/10 ns
UT: 40 dB/10 ns

Acoustic Specifications

ModelOmniScan X3OmniScan X3 64Both
PulserPA ChannelPA ChannelUT Channels
Voltage40 V, 80 V, and 115 V10 Vpp, 20 Vpp, 40 Vpp, 80 Vpp, 120 Vpp, and 160 Vpp85 V, 155 V, and 295 V
Pulse WidthAdjustable from 30 ns to 500 ns; resolution of 2.5 nsAdjustable from 30 ns to 1000 ns (half period of bipolar pulse or duration of negative of pulse); resolution of 5 nsAdjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Fall Time< 10 ns< 10 ns< 10 ns
Pulse ShapeNegative square pulseBipolar negative-positive square pulse Negative square pulse
Output Impedance28 Ω in pulse-echo
24 Ω in pitch-catch
35 Ω< 30 Ω
ReceiverPA ChannelUT Channels
Gain Range0 dB to 80 dB maximum input signal; 550 mVp-p (full-screen height).0 dB to 80 dB; maximum input signal 900 mVp-p (full-screen height).0 dB to 120 dB maximum input signal; 34.5 Vp-p (full-screen height).
Input Impedance57 Ω ± 10% at 9 MHz in pulse-echo
100 Ω ± 10% at 9 MHz in pitch-catch
120 Ω ±10 % at 13 MHz50 Ω in pulse-echo mode
50 Ω in pulse-receive mode
System Bandwith0.5 MHz to 18 MHz0.2 MHz to 26.5 MHz0.25 MHz to 28 MHz
Beam FormationPA ChannelUT Channels
Scan TypeSingle, linear, sectorial, compound, and TFM
Maximum ApertureOMNIX3-PATFM1664PR = 16 elements
OMNIX3-PATFM16128PR = 16 elements
OMNIX3-PATFM32128PR = 32 elements
OMNIX3-PATFM64128PR = 64 elements
Number of Receiving ElementsOMNIX3-PATFM1664PR = 64 receiving elements
OMNIX3-PATFM16128PR = 128 receiving elements
OMNIX3-PATFM32128PR = 128 receiving elements
OMNIX3-PATFM64128PR =128 elements
Number of Focal LawsUp to 1024
Delay Range Transmission0 µs to 10 µs in 2.5 ns increments0 µs to 10 µs in 5 ns increments
Delay Range Reception0 µs to 6.4 µs in 2.5 ns increments

TFM/FMC

Supported ModesPulse-echo: L-L, T-T, and TT-TT
Self-tandem: LL-L, TT-T, TT-L, TL-T, LT-T, TTT-TT, and TL-L
Number of GroupsUp to 4 simultaneous TFM groups
Maximum Aperture64-element aperture for 64:128PR
64-element extended aperture (32:128PR only)
32-element extended aperture for 16:64PR and 16:128PR
128-element extended aperture for 64:128PR
Image ResolutionUp to 1024 × 1024 (1 M points) for each TFM group
Live TFM EnvelopeYes

Operating Environment

Ingress Protection RatingIP65 certified (completely protected against dust and water jets from all directions (6.3 mm nozzle))
Shockproof RatingDrop tested according to MIL-STD-810G
Intended UseIndoor and outdoor use
AltitudeUp to 2,000 m (6,561 ft)
Operating Temperature−10 °C to 45 °C (14 °F to 113 °F)
Storage Temperature−20 °C to 60 °C (−4 °F to 140 °F) (with battery inside)
−20 °C to 70 °C (−4 °F to 158 °F) (with no battery inside)
  • Availability: 16 In Stock

We have a number of Home Delivery services available to you. Availability of these options will be shown at checkout.

Delivery ServiceDescriptionPlease NotePrice
StandardWithin 3-4 working days
(07:00 - 19:30hrs)
Weekdays Only (only applies to orders placed before 6pm)$3.95
Express DeliveryNext Working Day (08:00 - 18:00hrs)Weekdays Only, applies to orders placed before 4pm Mon-Thurs, before 3pm on Fri & before 2pm on Sat (no Sunday deliveries)$5.95
Premium Delivery - DPDNext Working Day (07:00 - 19:30hrs)Weekdays Only, applies to orders placed before 4pm Monday-Thursday. (Orders placed after 4pm Thur - Sunday before 1pm, will be delivered Monday)$6.95
Large Parcel DeliveryWithin 3-5 working days (07:00 - 19:30hrs)Weekdays Only (only applies to orders placed before 6pm)$14.95
Premium Saturday DeliverySaturday Delivery (07:00 - 19:30hrs)Delivered Saturday with a 1 Hour delivery slot and Tracking. (only applies to orders placed on Friday before 2pm)$7.95
Premium Sunday DeliverySunday Delivery (07:00 - 19:30hrs)Delivered Sunday with a 1 Hour delivery slot and Tracking. (only applies to orders placed on Friday before 2pm)$7.95

Customers reviews

There are no reviews yet.

Be the first to review “New Olympus OmniScan X3 64 Phased Array Flaw Detector”

Your email address will not be published. Required fields are marked *

Search for products

Back to Top
Product has been added to your cart