GE KrautKramer USM GO
GE KrautKramer USM GO portable ultrasonic flaw detector weighs less than 2 pounds, is robust and well sealed meeting IP67, and built to withstand the rigors and use in harsh industrial environments. It is simple to operate using one hand and its large, high resolution (WVGA) A-Scan display and outstanding ultrasonic performance are essential for inspections based on common codes and standards. The first choice when top UT performance, combined with ultra-portability and one-hand operation is required.
Ergonomically Designed with the User in Mind
The USM Go ultrasonic portable flaw detector has been ergonomically designed to provide an instrument that is light, small and easy to use in the harshest of inspection environments.
GE KrautKramer USM GO
Features:
- Portability
- Small size, lightweight, robust, dust- and waterproof construction allow the instrument to be easily operated in confined spaces, areas of difficult access, and in harsh environments.
- Can be operated with one hand, leaving other hand free for other tasks, such as maintaining probe in optimum position or holding on to ladders.
- Light enough to be carried throughout a whole day’s shift.
- Battery provides up to 6 hours operation. Can be recharged on- or off-board.
- Several accessories to improve mobility are available: wrist strap, shoulder harness, belt holster.
- Easy-to-Read Screen
- A display screen that is the same size as those in other GE flaw detectors, even though the instrument is much smaller than other instruments in the range
- An 800 x 480 pixel display, which is better resolution than a standard DVD.
- A screen with an optimized aspect ratio to ensure highly defined echo separation.
- A screen that can be easily viewed, whether hand-held or desk-mounted.
- A screen that has been ergonomically sized to help reduce eyestrain.
- An integrated stand allows the user to optimize the viewing angle, when the instrument is desk- or benchmounted
- AutoGate Threshold for faster measurement with optimum accuracy.
- A-scan freeze mode function (for gate A and B) fascilitates working in difficult ergonomic conditions.
- Display measurement indicators show both amplitude and distance to reduce risk of error
- Ease of Use
- Pressure-sensitive joystick imported and adapted from the successful range of remote visual inspection and ultrasonic equipment offered by GE.
- All controls within fingertip reach. User can dedicate function keys according to preference
- A “Flip” function allows the instrument to be used equally well by left-handed and right-handed people.
- A standard USB connection to allow data to be downloaded from the flaw detector for further analysis or storage.
- The instrument’s 2 GB memory can be easily exchanged by SD cards up to 16 GB
- Reports are produced in jpeg format so there is no need for special reading software.
- Printable summary list of all parameters
- Easy directory management on SD cards
- Built-in menu customization tool allows to adapt the menu structure to two levels of users.
- Smart notes function increases reporting efficiency.
- Yearly calibration reminder for efficient quality management
GE KrautKramer USM GO
Increasing Productivity
The USM Go features intuitive operation so there is virtually no time-consuming, learning curve.
You are productive from the moment you pick it up!
There is no need to refer to the manual, as clear instructions are provided as you go along. Navigation is simplified using the proven graphical user interface (GUI) and the innovative joystick, allowing one-handed operation for fast and accurate adjustment.
Other features allowing increased productivity are:
- A robust molded rubber casing to withstand the harshest environments and significantly reduce downtime. The instrument is dust- and waterproof to IP67 and is tested to withstand shock and vibration
- A simple on-board data logger to collect and save thickness measurements or eventually attach the corresponding A-scan image.
- Backwall Echo Attenuator (BEA) helps to find very small defects improving detectability.
- Automatic Gate Threshold for the 2 gates ensuring accurate measurements made under the same conditions
- Video recording upto 8 minutes allows live reporting.
High UT Performance
- State-of-the-art electronics, including digital amplification, for a wide range of application benefits.
- A wide Pulse Repetition Frequency range allows use at low PRF to inspect forged parts without any “ghost” echoes and to inspect welds at high PRF when fast and regular scanning movement is required.
- Precise Time of Flight indication in µs.
- TrueDGS compatible.
Versatile and Upgradeable
- Customized versions of the USM Go are also available, specially adapted to meet specific inspection codes or applications. For example, an optional square wave pulser can be supplied for applications involving the inspection of highly attenuative material. The versions shown in the table are currently available. For more detailed information, please contact your local GE representative or visit www.ge-mcs.com.
A Wide Range of Applications
The USM Go has been designed to provide flaw detection capability in inspection situations throughout the industrial and process spectrum, from aerospace to power generation and from the automotive sector to the oil and gas industry.
GE KrautKramer USM GO
These include:
Weld Inspection:
- Trigonometric projections
- AWS
- DAC
- DGS
Inspection of Forgings and Castings:
- Manual PRF adjustment
- Phantom echo indicator
- DGSS
- Backwall Echo Attenuator (BEA)
Inspection of rails:
- High PRF (up to 2000 Hz)
- Lightweight: 850 g (1.87 lb)
- Small size and ergonomics
Inspection of Composites:
- RF Display
- 2 gates with B-start triggered with echo in gate A
- TCG correction with high slope 120 dB/µs
- Reflector depth indicated in layer
For more demanding applications:
- Narrow band filters
- Low noise digital amplifier
- TCG correction with high slope 120 dB/µs
- Backwall Echo Attenuator (BEA)
Specifications:
LCD Display | |
Active Area | W x H: 108 mm x 64.8 mm (4.25” x 2.55”) |
Screen Diagonal | 5.0” |
Pixel Resolution | W x H: 800 x 480 pixels |
Connectors | |
Probe Connectors | Two LEMO-00 |
UT Output Connector | SAP output, alarm |
USB Interface | Micro USB connector |
SD Card Connector | Full size SD card slot to accommodate standard SD cards |
Pulser – All pulser measurements taken according to EN12668 specifications | |
Pulser Mode | Simulated spike standard, uni-polar square wave optional |
Pulser Voltage (SQ Mode) | 120 V to 300 V with 10 V steps |
Pulser Width (SQ Mode) | 30 ns to 500 ns with 20 ns steps |
Pulser Amplitude (Spike Mode) | Low : 120 V High: 300 V |
Damping | 50 or 1000 Ohms |
PRF | Automatically optimized between 15 Hz to 2000 Hz, 3 automatic adjustment modes : AutoLow, AutoMed, AutoHigh – Manual Control of PRF from 15 to 2000 Hz |
Receiver | |
Range | 14016 mm at steel longitudinal wave (557”) |
Digital Gain | Dynamic range of 110 dB, with 0.2 dB step |
Analog Bandwidth | 0.2 MHz – 20 MHz |
Filters | Broad band Narrow band filters 1; 2; 2.25; 4.5; 10; 13; 15 MHz |
Gate | |
Independent Gates | 2 Gates (A and B), Gate B can support triggering by Gate A |
Rectification | Full Wave (FW) Positive (POS) RF Negative (NEG) |
Measurement | Peak, Flank, JFlank |
Measurement units | TOF in, mm, µs Amplitude % dB |
Memory | |
Capacity | 2 GB SD card. Up to 16 GB memory cards can be used |
Report | Jpeg and BMP reports |
Data Logger | Option for thickness or A-scan recording, compatible with UltraMATE |
Environmental | |
Battery | 6 hours battery life On board charging Off board charging with optional adaptor Proportional battery gauge indicating remaining operation time Automatic energy server mode (Auto Off) allows saving battery life by putting the instrument in sleep mode automatically when not in use |
Charger | “Universal” AC (100-240 V, 50-60 Hz) Meets CCC, CE, UL, CSA and PSE requirements |
Size | 175 mm x 111 mm x 50 mm (6.8” x 4.3” x 1.9”) |
Weight | 845 g (1.87 lb) with the battery |
Languages | Bulgarian, Chinese, Czech, Dutch, English, French, German, Hungarian, Italian, Japanese, Portuguese, Polish, Russian and Spanish |
Protection as per Mil-Std-810F | |
Damp Heat and Humidity (Storage) | 10 cycles: 10 hrs at 60°C (140°F) down to 30°C (86°F), 10 hrs at 30°C (86°F) up to 60°C (140°F), transition within 2 hrs, 507.4 |
Temperature Shock (Storage) | 3 cycles: 4 hrs at –20°C (-4°F) up to 60°C (140°F), 4 hrs at 60°C (140°F), transitions within 5 minutes, 503.4 Procedure II |
Vibration | 514.5-5 Procedure I, annex C, figure 6, general exposure: 1 hr each axis |
Shock | 6 cycles each axis, 15 g, 11 ms half sine, 516.5 Procedure I |
Loose Cargo (In Shipping Container) | 514.5 Procedure II |
Transit Drop (Packaged for Shipment) | 516.5 Procedure IV, 26 drops |
Operating Temperature Range | 0°C to 55°C (32 to 131°F) |
Storage Temperature Range | -20°C to 60°C (-4 to 140 °F) with battery, 24 hrs |
Dustproof / Waterproof | As per IEC 529 specification for IP67 classification |
Compliance | EMC/EMI EN 55011 EN61000-6-2:2001 Ultrasound EN 12668 ASTM E1324 E317 ANSI/NCSL Z 540-1-1994 MIl STD 45662A MIL STD 2154 |
INCLUDE :
GE USM GO Ultrasonic Flaw Detector (BC# 38137-L/T*)
AC Adapter/Charger
Power Cord
USB PC Interface Cable
User Manual On CD-ROM
Carrying Case (G)
There are no reviews yet.