Waygate Krautkramer SpotChecker
Waygate Krautkramer SpotChecker
Waygate Krautkramer SpotChecker a Baker Hughes business product (formerly GE Inspection Technologies), is a hand-held flaw-detector for testing spotwelds in situ on the production line. The Spotchecker weighs just 3.2 kg, is battery operated, and is sealed to IP65. It features hot swap battery exchange to ensure continuous operation. Spotchecker does not require intensive training but offers the advantage of an “expert” system for people less qualified in weld inspection.
Waygate Krautkramer SpotChecker SpotChecker “completes” our existing USLT product line for spot weld testing. It offers true portability with a rugged, environmentally protective housing. The key difference between this product and existing spot weld testing solutions is its size/weight, environmental protection and user friendly operating.
FEATURES :
- “Completes” our existing USLT product line for spot weld testing
- Offers true portability with a rugged, environmentally protective housing
- The key difference between this product and existing spot weld testing solutions is its size/weight, environmental protection and user friendly operating
- Unique user interface to operate a pointing device by two trackballs
- Touchscreen operation for direct access of different functions and settings on a big 8.4 inch LCD
- Modern PC interfaces, including USB and wireless connection (WLAN, BlueTooth Remote control like USLT 2000)
- Ease of use for untrained inspectors (Application Specific Software UltraLOG)
- Compatible with other USLT 2000 solutions
- Hot swap battery exchange for continuous operation
- Environmentally protected according IP65
- Weight approx. 3.2 kg including batteries
SPECS :
Enclosure | |
Storage Temperature | -20 to 60 °C (-4 to 140°F) |
Operating Temperature | 0 to 45 °C (32 to 113°F) |
Dimensions | W 225 × H 314 × D 94 mm (W 8.85 x H 12.36 x D 3.7”) |
Weight | Approx. 3.2 kg (7.05 lb) (Incl. Batteries) |
Protection Rating | IP65 |
Shock Resistance | According to EN 600 68-2-27 |
Vibration Resistance | According to IEC 600 68-2-6 Fc |
Display | 8.4” TFT, SVGA, Touchscreen |
Control Devices | 2 × Trackball with 2 Buttons Each, 6 Function Keys, Touchscreen |
Connections | |
Probes | 2 × LEMO 00 Triax |
Power Supply Unit | 1 × LEMO 0S, 4-pin Socket |
Network | 1 × RJ45 |
USB | 4 × USB Type A Socket, 1 × USB Type B Socket |
Optional | WLAN, Bluetooth |
Power Supply | |
Operating Voltage | 15 V DC |
Power Consumption | Approx. 22 W |
Batteries | 2 × Lithium-Ion 10.8 V, 4.8 Ah |
Operating Time | Approx. 4.0 h with 2 Batteries |
Power Supply Unit | External Power Supply Unit 100 … 230 V AC, Max. 70 W |
Ultrasound | |
Pulser Type | Spike Pulse |
Pulse Repetition Frequency (PRF) | Max. 1,000 Hz, No Continuous Pulse Sequence |
Voltage | Max. 400 V |
Initial Pulse Rise Time | < 15 ns |
Damping | 50 Ohm |
Settings and Evaluation | |
Calibration Ranges | Min. 0 to 2.5 mm (0 to 0.1”) (steel); max. 0 to 9,700 mm (0 to 381”) (steel) |
Sound Velocity Range | 500 … 15,000 m/s (0.02 … 0.59 “/μs) Integrated, Editable Material Table |
Pulse Shift | -10 to 1,500 mm (-0.39 to 50”) (steel) |
Probe Delay | 0 to 100 μs |
Frequency Range | 2 to 20 MHz (–3 dB) |
Gain | 110 dB, Adjustable in Steps of 0.5/1/2/6 dB |
Rectification | Full-Wave |
Monitor Gates | 2 Independent Monitor Gates, Adjustable over the Entire Maximum Calibration Range; Evaluation on the Basis of A-scan at Display Refresh Rate |
Distance Measurement | – Initial Pulse and Measurement Point in Gate A or B – Measuring Points: Gate B – Gate A (Differential Measurement) |
Measurement Resolution | Sound Path/Time of Flight: up to 12.6 mm: 0.01 mm; Otherwise 0.2 % of Display Width |
Amplitude | 0.5 % Screen Height or 0.2 dB |
A-scan Digitization | 1,024 × 1,024 Pixels |
Display Freeze | Static A-scan Freeze, Dynamic A-scan Freeze (Freeze Box) |
Echo Comparison | Simultaneous Display of the Currently Active Signal and a Stored A-scan |
Dialog Languages | German, English, French, Spanish, Italian, Chinese, Japanese |
Units | mm |
Package Includes :
- SpotChecker Ultrasonic Instrument
- Operating Program SpotChecker UltraLOG (WIN 7)
- (pre-installed and on CD)
- Windows 7 Professional Multilanguage
- (pre-installed and on CD)
- Driver (WIN 7) CD
- Mains Adapter/Battery Charger
- Li-Ion Battery
- USB Cable (1 m)
- Operating Manual in English and German
- Transport Case
- Manufacturer’s Certificate
There are no reviews yet.